Enable Mld_Snooping - Extreme Networks EAS 200-24p Switch CLI Manual

enable mld_snooping

Description
This command allows you to enable MLD snooping on the switch. The forward_mcrouter_only function
is disabled by default. The enable mld_snooping forward_mcrouter_only command will enable the
MLD snooping function and the forward multicast router only function.
If forward multicast router only is enabled, the switch will forward all multicast traffic to the multicast
router, only. Otherwise, the switch forwards all multicast traffic to any IP router.
Format
enable mld_snooping
Parameters
When the switch receives an MLD report packet from a port, this port will be learned as a member
●
port of the multicast group that the port is reported, and the router will be a default member of this
multicast group. The multicast packet destined for this multicast group will be forwarded to all the
members of this multicast group.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable MLD snooping on the switch:
EAS 200-24p:admin# enable mld_snooping
Command: enable mld_snooping
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
enable mld_snooping
421