Extreme Networks EAS 200-24p Switch CLI Manual page 823

- 120 - Specifies that the offset range will 120 minutes.
annual - Set the Daylight Saving Time to annual mode.
●
s_date, e_date - (Optional) Configure the start /end date of Daylight Saving Time.
●
- <start_date 1-31> - Enter the starting date of Daylight Saving Time here. This range must be
between 1 an 31.
- <end_date 1-31> - Enter the ending date of Daylight Saving Time here. This range must be
between 1 an 31.
s_mth, e_mth - (Optional) Configure the start /end month number of Daylight Saving Time.
●
- <start_mth 1-12> - Enter the starting month number of Daylight Saving Time here. This value
must be between 1 and 12.
- <end_mth 1-12> - Enter the ending month number of Daylight Saving Time here. This value
must be between 1 and 12.
s_time, e_time - (Optional) Configure the start /end time of Daylight Saving Time.
●
- <start_time hh:mm> - Enter the starting time of Daylight Saving Time here. This value must
be in the hh:mm format.
- <end_time hh:mm> - Enter the starting time of Daylight Saving Time here. This value must be
in the hh:mm format.
offset - (Optional) Indicates number of minutes to add or to subtract during summertime. The
●
ranges of offset are 30, 60, 90,120; default value is 60.
- 30 - Specifies that the offset range will 30 minutes.
- 60 - Specifies that the offset range will 60 minutes.
- 90 - Specifies that the offset range will 90 minutes.
- 120 - Specifies that the offset range will 120 minutes.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure time:
EAS 200-24p:admin# config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00
e_week
2 e_day wed e_mth 10 e_time 15:30 offset 30
Command: config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2 e
_day wed e_mth 10 e_time 15:30 offset 30
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config dst
823