Show Cfm Mp_Ltr_All - Extreme Networks EAS 200-24p Switch CLI Manual

show cfm remote_mep
Description
This command is used to show remote MEPs.
Format
show cfm remote_mep [mepname <string 32> | md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>] mepid <int 1-
8191>] remote_mepid <int 1-8191>
Parameters
mepname – (Optional) Specifies the MEP name used.
●
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
●
md – (Optional) Specifies the maintenance domain name.
●
<string 22> - Enter the maintenance domain name her. This name can be up to 22 characters long.
●
md_index – (Optional) Specifies the maintenance domain index.
●
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must between
●
1 and 4294967295.
ma – (Optional) Specifies the maintenance association name.
●
<string 22> - Enter the maintenance association name her. This name can be up to 22 characters
●
long.
ma_index – (Optional) Specifies the maintenance association index.
●
<uint 1-4294967295> - Enter the maintenance association index value here. This value must
●
between 1 and 4294967295.
mepid – (Optional) Specifies the MEP ID used.
●
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and 8191.
●
remote_mepid - Specifies the Remote MEP ID used.
●
<int 1-8191> - Enter the remote MEP ID used here. This value must be between 1 and 8191.
●
Restrictions
None.
Extreme Networks EAS 200-24p Switch CLI Manual
show cfm remote_mep
303