Debug Stp State - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 35: MSTP debug enhancement Command List

debug stp state

Description
This command is used to enable or disable the STP debug state.
Format
debug stp state [enable | disable]
Parameters
state - Specifies the STP debug state.
●
enable - Enable the STP debug state.
●
disable - Disable the STP debug state.
●
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the STP debug state to enable, and then disable the STP debug state:
EAS 200-24p:admin# debug stp state enable
Command: debug stp state enable
Success.
EAS 200-24p:admin# debug stp state disable
Command: debug stp state disable
Success.
EAS 200-24p:admin#
542
Extreme Networks EAS 200-24p Switch CLI Manual