Config 802.1P User_Priority - Extreme Networks EAS 200-24p Switch CLI Manual

config 802.1p user_priority

Description
Used to map the 802.1p user priority of an incoming packet to one of the eight hardware queues
available on the switch.
Format
config 802.1p user_priority <priority 0-7> <class_id 0-7>
Parameters
<priority 0-7> - The 802.1p user priority you want to associate with the <class_id> (the number of
●
the hardware queue) with.
<class_id 0-7> - The number of the switch's hardware priority queue. The switch has 8 hardware
●
priority queues available. They are numbered between 0 (the lowest priority) and 7 (the highest
priority).
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the 802.1p user priority:
EAS 200-24p:admin#config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config 802.1p user_priority
667