Debug Stp Show Flag - Extreme Networks EAS 200-24p Switch CLI Manual

debug stp show flag

Description
This command used to display the STP debug level on specified ports.
Format
debug stp show flag {ports <portlist>}
Parameters
ports - (Optional) Specifies the STP ports to display.
●
<portlist> - (Optional) Enter the list of port used for this configuration here.
●
If no parameter is specified, all ports on the switch will be displayed.
Restrictions
Only Administrator-level users can issue this command.
Extreme Networks EAS 200-24p Switch CLI Manual
debug stp show flag
537