Config 802.1X Authorization Attributes - Extreme Networks EAS 200-24p Switch CLI Manual

config 802.1x authorization attributes

Description
The command config 802.1x authorization attributes is used to enable or disable acceptance of
authorized configuration.
When the authorization is enabled for 802.1X's RADIUS authentication, the authorized attributes (for
example VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server will be accepted if
the global authorization status is enabled.
Format
config 802.1x authorization attributes radius [enable | disable]
Parameters
radius - If specified to enable, the authorization attributes (for example VLAN, 802.1p default
●
priority, and ACL) assigned by the RADUIS server will be accepted if the global authorization status
is enabled. The default state is enabled.
enable - Specifies to enable the authorization attributes.
●
disable - Specifies to disable the authorization attributes.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
The following example will disable to accept the authorized data assigned from the RADIUS server:
EAS 200-24p:admin#
Command: config 802.1x authorization attributes radius disable
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config 802.1x authorization attributes radius disable
config 802.1x authorization attributes
83