Delete Ipv6Route - Extreme Networks EAS 200-24p Switch CLI Manual

delete ipv6route

Description
This command is used to delete an IPv6 static route. If the next hop is a global address, it is not needed
to indicate the interface name. If the next hop is a link local address, then the interface name must be
specified.
Format
delete ipv6route
Parameters
default - Specifies the default route.
●
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters long.
●
<ipv6addr> - Specify the next hop address for the default route.
●
all - Specifies that all static created routes will be deleted.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
Delete an IPv6 static route:
EAS 200-24p:admin# delete ipv6route default System 3FFC::
Command: delete ipv6route default System 3FFC::
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
[default] [<ipif_name 12> <ipv6addr> | <ipv6addr> | all]
delete ipv6route
451