Extreme Networks EAS 200-24p Switch CLI Manual page 612

Chapter 43: Port Security Command List
no_limit - Specifies that the maximum learning address value will be set to no limit.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the port-based port security setting so that the maximum number of port security entries is
restricted to 10, and the lock_address mode is set to permanent on port 6:
EAS 200-24p:admin# config port_security ports 6 admin_state enable
max_learning_addr
10 lock_address_mode permanent
Command: config port_security ports 6 admin_state enable max_learning_addr 10
lock_address_mode permanent
Success.
EAS 200-24p:admin#
612
Extreme Networks EAS 200-24p Switch CLI Manual