Chapter 22: Filter Database (FDB) Command List
show multicast_fdb
Description
This command is used to display the multicast forwarding database of the switch.
Format
show multicast_fdb {[vlan <vlan_name 32> | vlanid <vidlist>] | mac_address
<macaddr>}
Parameters
vlan - (Optional) The name of the VLAN on which the MAC address resides.
●
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
●
vlanid - (Optional) Displays the entries for the VLANs indicated by VID list.
●
<vidlist> - Enter the VLAN ID list here.
●
mac_address - (Optional) Specifies a MAC address, for which FDB entries will be displayed.
●
<macaddr> - Enter the MAC address here.
●
If no parameter is specified, all multicast FDB entries will be displayed.
Restrictions
None.
Example
To display the multicast MAC address table:
EAS 200-24p:admin# show multicast_fdb
Command: show multicast_fdb
VLAN Name
: default
MAC Address
: 01-00-5E-00-00-00
Mode
: Static
Total Entries : 1
354
Extreme Networks EAS 200-24p Switch CLI Manual