Chapter 32: MAC-based Access Control Command List
config mac_based_access_control password
Description
This command is used to configure the RADIUS authentication password for MAC-based Access
Control.
Format
config mac_based_access_control password <passwd 16>
Parameters
password - In RADIUS mode, the switch will communicate with the RADIUS server using this
●
password. The maximum length of the key is 16.
<password> - Enter the password used here. The default password is "default".
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the MAC-based Access Control password:
EAS 200-24p:admin# config mac_based_access_control password switch
Command: config mac_based_access_control password switch
Success.
EAS 200-24p:admin#
506
Extreme Networks EAS 200-24p Switch CLI Manual