show cfm ports
Description
This command is used to show the CFM state of specified ports.
Format
show cfm ports <portlist>
Parameters
ports - Specifies the logical port list.
●
<portlist> - Enter the list of ports used for this configuration here.
●
Restrictions
None.
Example
To show the CFM ports:
EAS 200-24p:admin#show cfm ports 3-6
Command: show cfm ports 3-6
Port
State
-----
--------
3
Enabled
4
Enabled
5
Enabled
6
Disabled
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
show cfm ports
287