Show Mld_Snooping Static_Group - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 25: IGMP / MLD Snooping Command List

show mld_snooping static_group

Description
This command used to display the MLD snooping multicast group static members.
Format
show mld_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>]
<ipv6addr>}
Parameters
vlan - (Optional) Specify the name of the VLAN on which the static group resides.
●
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
●
vlanid - (Optional) Specify the ID of the VLAN on which the static group resides.
●
<vlanid_list> - Enter the VLAN ID list here.
●
<ipv6addr> - (Optional) Specify the multicast group IPv6 address.
●
Restrictions
None.
Example
To display all the MLD snooping static groups:
EAS 200-24p:admin# show mld_snooping static_group
VLAN ID/Name
-------------- ------------------
1 / Default
Total Entries : 1
EAS 200-24p:admin#
432
IP Address
------------------------
FF1E ::1
Static Member Ports
9-10
Extreme Networks EAS 200-24p Switch CLI Manual