show qinq ports
Description
This command is used to display the QinQ configuration of the ports.
Format
show qinq ports {<portlist>}
Parameters
ports - Specifies a list of ports to be displayed.
●
<portlist> - (Optional) Enter the list of ports to be displayed here.
●
Restrictions
None.
Example
To show the QinQ mode for ports 1-2:
EAS 200-24p:admin#show qinq ports 1-2
Command: show qinq ports 1-2
Port ID:
1
---------------------------------------------------------
Role:
Miss Drop:
Outer Tpid:
Add Inner Tag:
Port ID:
2
---------------------------------------------------------
Role:
Miss Drop:
Outer Tpid:
Add Inner Tag:
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
NNI
Disabled
0x8100
Disabled
NNI
Disabled
0x8100
Disabled
show qinq ports
649