Chapter 44: Power over Ethernet (PoE) Command List
show poe system
Description
Used to display the setting and actual values of the whole PoE system.
Format
show poe system
Parameters
None.
Restrictions
None.
Example
To display PoE system:
EAS 200-24p:admin#show poe system
Command: show poe system
PoE System Information
---------------------------------------------------
Power Limit
Power Consumption
Power Remained
Power Disconnection Method : Deny Next Port
Detection Legacy PD
If Power Disconnection Method is set to deny next port, then the system can not
utilize out of its maximum power capacity. The maximum unused watt is 19W.
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
626
: 740(Watts)
: 0(Watts)
: 351(Watts)
: Disabled
Extreme Networks EAS 200-24p Switch CLI Manual