Chapter 2: Basic Command List
show ports
Description
This command is used to display the current configurations of a range of ports.
Format
show ports {<portlist>} {[description | err_disabled | details | media_type]}
Parameters
ports - Specifies a range of ports to be displayed.
●
<portlist> - (Optional) Enter the list of ports to be configured here.
●
description - (Optional) Indicates if port description will be included in the display.
●
err_disabled - (Optional) Indicates if ports are disabled by some reasons will be displayed.
●
details - (Optional) Displays the port details.
●
media_type - (Optional) Displays port transceiver type.
●
Restrictions
None.
46
Extreme Networks EAS 200-24p Switch CLI Manual