Chapter 7: Access Control List (ACL) Egress Command List
delete egress_access_profile
Description
Delete egress access profile command can only delete the profile which is created by egress ACL
module.
Format
delete egress_access_profile [profile_id <value 1-4> | profile_name <name 1-
32> | all]
Parameters
profile_id - Specifies the index of the egress access list profile.
●
<value 1-4> - Enter the profile ID used here. This value must be between 1 and 4.
●
profile_name - Specifies the name of the profile. The maximum length is 32 characters.
●
<name 1-32> - Enter the profile name used here. This name can be up to 32 characters long.
●
all - Specifies that the whole egress access list profile will be deleted.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete egress access list profile ID 1:
EAS 200-24p:admin#
Command: delete egress_access_profile profile_id 1
Success.
EAS 200-24p:admin#
176
delete egress_access_profile profile_id 1
Extreme Networks EAS 200-24p Switch CLI Manual