Config Snmp System_Location - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 54: Simple Network Management Protocol (SNMP) Command List

config snmp system_location

Description
This command is used to enter a description of the location of the switch.
Format
config snmp system_location {<sw_location>}
Parameters
system_location - A maximum of 128 characters is allowed. And NULL string is accepted
●
<sw_location> - (Optional) Enter the system location string here.
●
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the switch location for "HQ 5F":
EAS 200-24p:admin# config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
EAS 200-24p:admin#
762
Extreme Networks EAS 200-24p Switch CLI Manual