Config Accounting Service - Extreme Networks EAS 200-24p Switch CLI Manual

config accounting service

Description
Use to configure the state of the specified RADIUS accounting service.
Format
config accounting service [network | shell | system] state [enable | disable]
Parameters
network - Accounting service for 802.1X port access control. By default, the service is disabled.
●
shell - Accounting service for shell events: When user logs on or out the switch (via the console,
●
Telnet, or SSH) and timeout occurs, accounting information will be collected and sent to RADIUS
server. By default, the service is disabled.
system - Accounting service for system events: reset, reboot. By default, the service is disabled.
●
state - Specifies the state of the specified service.
●
enable - Specifies to enable the specified accounting service.
●
disable - Specifies to disable the specified accounting service.
●
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Enable it to configure accounting shell state:
EAS 200-24p:admin# config accounting service shell state enable
Command: config accounting service shell state enable
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config accounting service
107