Enable Loopdetect - Extreme Networks EAS 200-24p Switch CLI Manual

enable loopdetect

Description
This command is used to enable the LBD function globally on the switch. The default state is disabled.
Format
enable loopdetect
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the LBD function globally:
EAS 200-24p:admin# enable loopdetect
Command: enable loopdetect
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
enable loopdetect
497