Cfm Lock Md - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 18: Connectivity Fault Management (CFM) Extension Command List

cfm lock md

Description
This command is used to start/stop cfm management lock. This command will result in the MEP sends
a LCK PDU to client level MEP.
Format
cfm lock md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> |
ma_index <uint 1-4294967295>] mepid <int 1-8191> remote_mepid <int 1-8191>
action [start | stop]
Parameters
md - Specifies the maintenance domain name.
●
<string 22> - Enter the maintenance domain name here. This name can be up to 22 characters
●
long.
md_index – (Optional) Specifies the maintenance domain index.
●
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must between
●
1 and 4294967295.
ma - Specifies the maintenance association name.
●
<string 22> - Enter the maintenance association name here. This name can be up to 22 characters
●
long.
ma_index – (Optional) Specifies the maintenance association index.
●
<uint 1-4294967295> - Enter the maintenance association index value here. This value must
●
between 1 and 4294967295.
mepid - The MEP ID in the MD which sends LCK frame.
●
<int 1-8191> - Enter the MEP ID value here. This value must be between 1 and 8191.
●
remote_mepid - The peer MEP is the target of management action.
●
<int 1-8191> - Enter the remote MEP ID used here. This value must be between 1 and 8191.
●
action - Specifies to start or to stop the management lock function.
●
start - Specifies to start the management lock function.
●
stop - Specifies to stop the management lock function.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
314
Extreme Networks EAS 200-24p Switch CLI Manual