Extreme Networks EAS 200-24p Switch CLI Manual page 307

clear cfm pkt_cnt
Description
This command is used to clear the CFM packet's RX/TX counters.
Format
clear cfm pkt_cnt {[ports <portlist> {[rx | tx]} | [rx | tx] | ccm]}
Parameters
ports - (Optional) The ports which require need the counters clearing. If not specified, all ports will
●
be cleared.
<portlist> - Enter the list of ports used for this configuration here.
●
rx - (Optional) Specifies to clear the RX counter.
●
tx - (Optional) Specifies to clear the TX counter. If not specified, both of them will be cleared.
●
rx - (Optional) Specifies to clear the RX counter.
●
tx - (Optional) Specifies to clear the TX counter. If not specified, both of them will be cleared.
●
ccm - (Optional) Specifies the CCM RX counters.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear the CFM packet's RX/TX counters:
EAS 200-24p:admin# clear cfm pkt_cnt
Command: clear cfm pkt_cnt
Success.
EAS 200-24p: clear cfm pkt_cnt ccm
Command: clear cfm pkt_cnt ccm
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
clear cfm pkt_cnt
307