save
Description
Used to save the current configuration to a file. This command is required to be supported regardless of
whether file system is supported or whether multiple configuration files are supported.
Format
save {[config <pathname 64> | log | all]}
Parameters
config – Specifies to save the configuration to a file.
●
<pathname 64> - (Optional) The pathname specifies the absolute pathname on the device file
●
system. If pathname is not specified, it refers to the boot up configuration file. This name can be
up to 64 characters long.
log – Specifies to save the log.
●
all – Specifies to save the configuration and the log.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To save the configuration:
EAS 200-24p:admin#save config c:/3120.cfg
Command: save config c:/3120.cfg
Saving all configurations to NV-RAM.......... Done.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
save
267