Config Sntp - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 60: Time and SNTP Command List

config sntp

Description
The config sntp command changes SNTP configurations.
Format
config sntp {primary <ipaddr> | secondary <ipaddr> | poll-interval <int 30-
99999>}
Parameters
primary - (Optional) SNTP primary server IP address.
●
<ipaddr> - Enter the IP address used for this configuration here.
●
secondary - (Optional) SNTP secondary server IP address.
●
<ipaddr> - Enter the IP address used for this configuration here.
●
poll-interval - (Optional) Specifies the polling interval range seconds.
●
<int 30-99999> - Enter the polling interval range here. This value must be between 30 and 99999
●
seconds.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure SNTP:
EAS 200-24p:admin# config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval
30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
EAS 200-24p:admin#
816
Extreme Networks EAS 200-24p Switch CLI Manual