Config Loopdetect Log - Extreme Networks EAS 200-24p Switch CLI Manual

config loopdetect log

Description
This command is used to configure the log state for LBD. The default value is enabled.
Format
config loopdetect log state [enable | disable]
Parameters
state - Specifies the state of the LBD log feature.
●
enable - Enable the LBD log feature.
●
disable - Disable the LBD log feature. All LBD-related logs will not be recorded.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the log state for LBD:
EAS 200-24p:admin# config loopdetect log state enable
Command: config loopdetect log state enable
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config loopdetect log
501