Config Snmp System_Contact - Extreme Networks EAS 200-24p Switch CLI Manual

config snmp system_contact

Description
This command is used to enter the name of a contact person who is responsible for the switch.
Format
config snmp system_contact {<sw_contact>}
Parameters
system_contact - A maximum of 128 characters is allowed. And NULL string is accepted.
●
<sw_contact> - (Optional) Enter the system contact string here.
●
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the switch contact to "MIS Department II":
EAS 200-24p:admin# config snmp system_contact "MIS Department II"
Command: config snmp system_contact "MIS Department II"
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config snmp system_contact
763