Config Ssh Authmode - Extreme Networks EAS 200-24p Switch CLI Manual

config ssh authmode

Description
This command configures user authentication method for SSH.
Format
config ssh authmode [password | publickey | hostbased] [enable | disable]
Parameters
password - Specifies user authentication method.
●
publickey - Specifies user authentication method.
●
hostbased - Specifies user authentication method.
●
enable - Enable user authentication method.
●
disable - Disable user authentication method.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure user authentication method:
EAS 200-24p:admin# config ssh authmode publickey enable
Command: config ssh authmode publickey enable
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config ssh authmode
683