Chapter 2: Basic Command List
show greeting_message
Description
The command is used to display greeting message.
Format
show greeting_message
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To display greeting message:
EAS 200-24p:admin# show greeting_message
Command: show greeting_message
================================================================================
Copyright(C) 2000-2011 Extreme Networks. All rights reserved.
================================================================================
EAS 200-24p:admin#
40
EAS 200-24p Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.00.007
Extreme Networks EAS 200-24p Switch CLI Manual