Delete Link_Aggregation Group_Id - Extreme Networks EAS 200-24p Switch CLI Manual

delete link_aggregation group_id

Description
Use to delete a previously configured link aggregation group.
Format
delete link_aggregation group_id <value 1-12>
Parameters
group_id - Specifies the group id. The number of link aggregation groups is project dependency. The
●
group number identifies each of the groups.
<value 1-12> - Enter the group ID value here. This value must be between 1 and 12.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete link aggregation group:
EAS 200-24p:admin# delete link_aggregation group_id 3
Command: delete link_aggregation group_id 3
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
delete link_aggregation group_id
459