Chapter 53: Show Technical Support Command List
show tech_support
Description
This command is especially used by the technical support personnel to dump the device overall
operation information. The information is project dependent and includes the following information.
Basic System information
●
System log
●
Running configuration
●
Layer 1 information
●
Layer 2 information
●
Layer 3 information
●
Application
●
OS status
●
Controller's status
●
This command can be interrupted by Ctrl - C or ESC when it is executing.
Format
show tech_support
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To show the information of technique's support:
EAS 200-24p:admin# show tech_support
Command: show tech_support
#-------------------------------------------------------------------------------
#
#
#
#
#
Copyright(C) 2000-2011
#-------------------------------------------------------------------------------
730
EAS 200-24p Gigabit Ethernet Switch
Technical Support Information
Firmware: 1.00.007
Extreme Networks. Corporation. All rights reserved.
Extreme Networks EAS 200-24p Switch CLI Manual