show cfm fault
Description
This command displays all the fault conditions detected by the MEPs contained in the specified MA or
MD. This display provides the overview of the fault status by MEPs.
Format
show cfm fault {md [<string 22> | md_index <uint 1-4294967295>] {ma [<string
22> | ma_index <uint 1-4294967295>]}}
Parameters
md - (Optional) Specifies the maintenance domain name.
●
<string 22> - Enter the maintenance domain name used here. This name can be up to 22
●
characters long.
md_index - (Optional) Specifies the maintenance domain index.
●
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must be
●
between 1 and 4294967295.
ma - (Optional) Specifies the maintenance association name.
●
<string 22> - Enter the maintenance association name used here. This name can be up to 22
●
characters long.
ma_index - (Optional) Specifies the maintenance association index.
●
<uint 1-4294967295> - Enter the maintenance association index value here. This value must be
●
between 1 and 4294967295.
Restrictions
None.
Example
To show the CFM faults:
EAS 200-24p:admin# show cfm fault
Command: show cfm fault
MD Name
MA Name
----------- ----------- ----- ---------------------- ------------ ------------
op_domain
op1
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
MEPID
Status
1
Cross-connect CCM Received
AIS Status
LCK Status
show cfm fault
291