Extreme Networks EAS 200-24p Switch CLI Manual page 488

Chapter 30: Link Layer Discovery Protocol (LLDP) Command List
To display remote table in detailed mode:
EAS 200-24p:admin#
Command: show lldp remote_ports 1 mode detailed
Port ID : 1
---------------------------------------------------------------------
Remote Entities count : 1
Entity 1
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
Port Description
System Name
System Description
System Capabilities
Management Address
Port VLAN ID
Management Address
Address 1
Subtype
Address
IF type
OID
Address 2
Subtype
Address
IF type
OID
PPVID Entries
Entry 1
Port and protocol VLAN ID
PPVID supported
PPVID Enable
Entry 2
Port and protocol VLAN ID
PPVID supported
PPVID Enable
Entry 3
Port and protocol VLAN ID
PPVID supported
PPVID Enable
VLAN Name Entries
Entry 1
VLAN ID
VLAN Name
488
show lldp remote_ports 1 mode detailed
: MACADDRESS
: 00-01-02-03-04-01
: LOCAL
: 1/3
: RMON Port 3 on Unit 1
: Switch1
: Ethernet Switch
: Repeater, Bridge
: 10.90.90.91
: 1
: IPV4
: 192.168.254.10
: unknown
: 1.3.6.1.4.1.171.10.36.1.11
: IPV4
: 192.168.254.11
: unknown
: 2.3.6.1.4.1.171.10.36.1.11
: 4
: supported
: Enable
: 5
: supported
: Enable
: 6
: supported
: Enable
: 1
: V1
Extreme Networks EAS 200-24p Switch CLI Manual