Optional Operator Features; Programming Procedures, Continued - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Optional Operator Features

Optional Operator Features
The summaries in this section affect feature programming for both DLC and
QCC operator positions and include the following:
Operator Hold Timer
DLC Operator Automatic Hold
QCC operator features are covered in the next section.
See Chapter 3, "Common Administrative Procedures, " for detailed programming
information.
Operator Hold Timer
Use this procedure to set the length of the operator hold timer for all DLCs and
QCCs. If the system operator does not pick up the call within the time
programmed, an abbreviated ring reminds the operator that a call is being held.
This option cannot be programmed for individual operator positions.
Summary: Operator Hold Timer
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All
Not required
Form 6a, Optional Operator Features
60 seconds
10 to 255 seconds
No
No
Operator → Hold Timer → Drop → Dial no. of seconds →
Enter → Exit
[ F3 ] → [ F3 ] → [ Alt ] + [ P ] → Type no. of seconds → [ F10 ] → [ F5 ]
Programming Procedures
4-193