Tie Trunks - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Tie Trunks

Tie Trunks
This section covers programming procedures for the following tie trunk options:
Direction
Tie Trunk Seizure Type
E&M Signal
Dial Mode
Tie Trunk Dial Tone
Tie Trunk Answer Supervision Time
Disconnect Time
See "Equipment and Operations Reference" for additional information on tie
trunks.
Direction
Use this procedure to specify whether tie trunks operate in a one-or two-way
direction. For one-way tie trunks, you must also specify whether the direction is
out
or in.
Summary: Direction
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All
Tie trunk idle
Form 3c, Incoming Trunks: Tie
Two-way
Two-way, Outgoing, Incoming
No
Yes
LinesTrunks → TIE Lines → Direction → Dial trunk no. →
Enter → Specify direction → Enter → Exit → Exit
[ F2 ] → [ F2 ] → [ F1 ] → Type trunk no. → [ F10 ] → Specify direction
→ [ F10 ] → [ F5 ] → [ F5 ]
Programming Procedures
4–77