Telephones - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Telephones

Telephones
This section contains the following procedures:
Assigning outside lines or trunks to the buttons on a telephone (including
lines and trunks used for loudspeaker paging).
Copying line button assignments from one telephone to an individual
telephone or block of telephones.
Assigning the following buttons on telephones (for Hybrid/PBX systems
only):
System Access or Intercom Voice
System Access or Intercom Ring
System Access or Intercom Originate Only
Shared System or Intercom Access
Identifying analog multiline telephones that do not have built-in
speakerphones (BIS) or Hands Free Answer on Intercom (HFAI)
capability.
Identifying analog multiline telephones that require pairing of extension
jacks to provide the Voice Announce to Busy, or to provide voice and
data features.
Assign Trunks or Pools to Telephones
Use this procedure to assign outside lines/trunks (connected to the control unit)
to specific buttons on each telephone. The lines/trunks assigned to a button on
a telephone are called personal lines.
This procedure is used only to change or add personal lines, Loudspeaker
Paging, or Pool buttons (Hybrid/PBX only) to telephones. See "Assign Intercom
or System Access Button" procedures to add or change Intercom (Icom) or
System Access (SA) buttons.
Individual lines/trunks can be assigned to a maximum of 64 telephones.
Individual pools can be assigned as a Pool button on a maximum of 64
telephones.
The following lines/trunks cannot be assigned to a button on a telephone:
Lines/trunks used for Music On Hold
Lines/trunks used for maintenance alarms
Common Administrative Procedures
3–55