AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 740

Sample Reports
Table F–2, Continued
Menu Option Report Name
DisallowLst Disallowed Lists
DisallowTo Access to Disallowed Lists
ARS Automatic Route Selection
Ext Direct Extension Directory
Sys Direct System Directory
F-4
System Programming
Description
Telephone numbers included in
Disallowed Lists. Lists are numbered 0-7,
and entries are numbered 0–9.
Telephones to which Disallowed Lists are
assigned. Lists are numbered 0–7. If the
Disallowed List is assigned to Remote
Access users and barrier codes are used,
the barrier codes are numbered 0–16. If no
barrier codes are used, 17 means the
Disallowed List is assigned to tie-trunk
users, and 18 means the Disallowed List is
assigned to non-tie-trunk users.
Access code; table types with area codes
and exchanges; routes for sub-patterns A
and B, FRL, absorb digit, delete digit, Dial
0, and N11 tables.
Slot/port addresses, extensions, labels and
feature-related attributes. Column
headings are printed on the first page only
and are not carried over to subsequent
pages. Column headings 4 through 10
(and 14 through 20) should be read
vertically. That is: FACE (Forced Account
Code Entry); HBIS (HFAI/BIS); RCFW
(Remote Call Forward); MICD (Microphone
Disable); SIG (Voice Signal); RSTR (Calling
Restrictions); ARSR (ARS Restriction
Level).
System Speed Dial number, label and
telephone number in System Directory,
and whether number should display.
Continued on next page