AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 237

Optional Group Features
Console Display/Instructions
Specify the extension.
7
Group Calling xxxx:
Enter group members
Delete
Next
Backspace
Exit Enter
8 Assign or remove the extension from the calling group.
Select Enter or
Delete.
9 Continue to assign the extension to another calling group or go to Step 10.
Select Next
10 Return to the System Programming menu.
Select Exit three times.
Group Calling Line/Trunk or Pool Assignments
Use this procedure to assignor remove lines, trunks, or pools (Hybrid/PBX only)
that ring directly into a calling group.
Incoming calls on each line/trunk or pool can be directed to only one calling
group.
To reassign a line/trunk or pool to a new calling group, you must remove it from
its old group before making the new assignment.
Additional Information
xxxx = number entered in Step 5
If no DSS is attached:
SP:
"Entering an Extension"
If DSS is attached:
Toggle the red LED on or
.
off as required. Go to Step 9.
On = extension is a member of the calling
group.
Off = extension is not a member of the
calling group.
You may continue to assign or remove
extension from the calling group by
repeating Steps 7 and 8.
Return to Step 7 to continue programming. The
next calling group will be displayed on Line 1.
Common Administrative Procedures
PC
←
[ F10 ]
[ F8 ]
[ F9 ]
[ F5 ] [ F5 ] [ F5 ]
3–115