Information Screen; Menu Selection Screen - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Programming Procedures
Programming Screens
There are three types of system programming screens:
Information screens, to view what is currently programmed on the
system.
Menu selection screens, to select options from a menu.
Data entry screens, to enter values or to identify a specific extension or
line/trunk you want to program.
Figure 1–5 shows a sample information screen. When you select Sys Program from
the main menu screen (shown in Figure 1–2), the screen shown in Figure 1-5
appears with system setup information.
System Set-up
Review and Exit
Size: xxxx
Type: xxxx
Operator: xxxx xxxx xxxx
xxxx xxxx xxxx
Exit
Figure 1–5. Information Screen
You cannot make changes on an information screen. Select Exit ( [ F5 ] on the
PC) to continue to the next screen in the procedure.
Figure 1–6 shows a sample menu selection screen.
System Programming: >
Make a Selection
System
SysRenumber
Operator
LinesTrunks
Exit
Figure 1–6. Menu Selection Screen
Your system information appears in
place of the
Screen title and More indicator (>)
Prompt
Options
Extensions
Options
Tables
AuxEquip
Niqht Srvce
s.
1–11
Programming Basics