AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 633

Night Service
Summary: Night Service with Outward
Restriction
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Night Service with Time Set
Use this procedure to specify the time of day and the days of the week when
Night Service is to be activated and deactivated.
Enter the time of day as 4 digits, using 24-hour notation. Enter the day of the
week as a single digit (0 to 6), with 0 being Sunday. If you enter an invalid
number, the system truncates the number.
If you change the system time while Night Service is active, Night Service is
deactivated automatically and you must manually reactivate it.
Operators can override the timer and turn Night Service on and off manually.
This feature can be deactivated when out-of-the-ordinary situations occur (for
example, a midweek holiday).
System manager
All
Not required
Form 9b, Night Service: Outward Restrictions
No password
4 digits (any combination of 0 to 9)
Yes (Exclusion List)
No
NightSrvce → OutRestrict → Drop → Dial password →
Enter → Emergency → Dial item no. → Enter → Drop → Dial
telephone no. → Enter → ExcludeList → Dial ext. no. →
Enter → Exit → Exit
[ F10 ] → [ F2 ] → [ Alt ] + [ P ] → Type password → [ F10 ] → [ F3 ] → Type
item no. → [ F10 ] → [ Alt ] + [ P ] → Type telephone no. → [ F10 ] →
[ F4 ] → Type ext. no. → [ F10 ] → [ F5 ] → [ F5 ]
Programming Procedures
4–283