AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 183

Telephones
If you are copying assignments from an operator position to a block of
extensions that includes both operator and nonoperator extensions, the
information is copied only to the operator positions; the nonoperator positions
are not affected. Similarly, if you are copying assignments from a nonoperator
position to a block of extensions that includes both operator and nonoperator
extensions, the information is copied only to the nonoperator positions; the
operator positions are not affected. The system does not provide an error tone
to signal that the copy did not work for all of the extensions in the block.
Summary: Copy Line/Trunk Assignments
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
All
Telephone idle
4a, Extension Copy: Analog Multiline Telephone Template
4c, Extension Copy: MLX Telephone Template
Not applicable
Not applicable
Yes: lines/pools assigned to an extension.
Not applicable
To copy to a single extension:
Extensions → Line Copy → Single → Dial copy from ext.
no. → Enter → Dial copy to ext. no. → Enter → Exit → Exit
To copy to a block of extensions:
Extensions → Line Copy → Block → Dial copy from ext. no.
→ Enter → Dial ext. no of first telephone In block → Enter
→ Dial ext. no of last telephone in block → Enter → Exit →
Exit
To copy to a single extension:
[ F6 ] → [ F2 ] → [ F1 ] → Type copy from ext. no. → [ F10 ] → Type
copy to ext. no. → [ F10 ] → [ F5 ] → [ F5 ]
To copy to a block of extensions:
[ F6 ] → [ F2 ] → [ F2 ] → Type copy from ext. no. → [ F10 ] → Type
ext. no. of first telephone in block → [ F10 ] → Type ext. no. of
last telephone in block → [ F10 ] → [ F5 ] → [ F5 ]
Common Administrative Procedures
3–61