AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 617

Automatic Route Selection
Subpattern B Procedure
Console Display/Instructions
1 Enter the table ( nn = 1 to 48 ) and the pool route ( m = 1 to 6 ) number.
Subpattern B Restriction:
Enter table (1-18)
(0-6)
Backspace
Exit Enter
2 Save your entry.
Select Enter.
3 Enter the restriction level ( n = 0 to 6 ).
ARS Table xx Route x:
Enter restriction level
(0-6)
Backspace
Next
Exit
Enter
4 Continue to enter FRL for another pool route or go to Step 5.
Select Next.
Save your entry.
5
Select Enter.
6 Return to the System Programming menu.
Select Exit two times.
Digit Absorption
Use this procedure to specify how many of the digits dialed (O through 11) by
the caller should be absorbed (not sent to the telephone company's central
office) by the system when a call is made on an identified route.
Entries of 1 through 11 indicate that the system should not send the specified
number of digits, starting with the first digit dialed by the user after the dial-out
code.
Digit absorption is assigned to Tables 1 through 18.
NOTE:
Pool routes must be programmed before you assign digit absorption.
route
7
Dial or type [ nnm ].
xx = table number entered in Step 1
x = route number entered in Step 1
Return to Step 3. The next route will be
displayed on Line 1.
Additional Information
Programming Procedures
PC
←
[ F10 ]
←
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ]
4–267