AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 449

DID Trunks
Console Display/Instructions
7 Continue to specify trunk type for the other trunk block or go to Step 8.
Select Next.
8 Save your entry.
Select Enter.
9 Return to the System Programming menu.
Select Exit two times.
Disconnect Time
Use this procedure to specify the DID trunk disconnect time limit in
milliseconds.
Summary: Disconnect Time
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Disconnect Time
Console Display/Instructions
1 Select the Lines and Trunks menu.
System Programming:
Make a selection
System Extensions
SysRenumber Options
Operator Tables
LinesTrunks AuxEquip
Exit NightSrvce
Additional Information
Return to Step 6. The next trunk will be
displayed on Line 1.
System manager
Hybrid/PBX
Not required
Form 3d, Incoming Trunks: DID
500 ms
10 to 2400 ms, in increments of 10 ms
No
Yes
LinesTrunks → DID → Disconnect → Dial trunk no. → Enter
→ Drop → Dial no. of ms → Enter → Exit → Exit
[ F4 ] → [ F4 ] → [ F3 ] → Type trunk no. → [ F10 ] → [ Alt ] + [ P ] → Type
no. of ms → [ F10 ] → [ F5 ] → [ F5 ]
Additional Information
>
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ]
[ F4 ]
Programming Procedures
PC
PC
4–99