AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 625

Automatic Route Selection
Change FRL Procedure
Console Display/Instructions
1 Erase the current restriction level ( x ).
Special Numbers Pool:
Enter restriction level
(0-6)
x
Backspace
Exit Enter
2 Enter an FRL value ( n = 0 to 6 ).
3 Save your entry.
Select Enter.
4 Return to the System Programming menu.
Select Exit two times.
Other Digits Procedure
1 Erase the current other digits ( x }.
Special Numbers Digits
Enter other digits
x
Backspace
Exit Enter
2 Enter up to 20 other digits ( n = any combination of 0 to 9 ).
3 Save your entry.
Select Enter.
Return to the System Programming menu.
4
Select Exit two times.
Dial 0 Table
Use this procedure to specify pool routing, Facility Restriction Level (FRL), and
Other Digits for the Dial 0 table.
Only one route can be specified. The Subpattern B route cannot be specified
for this table, and digit absorption cannot be specified.
Additional Information
Dial or type [ n ].
Drop.
Press
Dial or type [ n ].
Programming Procedures
PC
[ Alt ] + [ P ]
←
[ F10 ]
[ F5 ] [ F5 ]
[ Alt ] + [ P ]
←
[ F10 ]
[ F5 ] [ F5 ]
4–275