AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 412

DS1 Facilities
Console Display/Instructions
6 Select a facility type.
DSL Slot xx:
Select one
T1
PRI
Enter
Exit
7
Save your entry.
Select Enter.
8 Select a trunk type.
Port Type Slot xx:
Select One
All Ground
GroundStart
Loop Start All L
TIE All TIE
All Unequip
Unequipped
Enter
Exit
Port Type Slot xx:
Select one
All DID
DID
Exit Enter
9 Save your entry.
Select Enter.
4-62 Programming Procedures
xx = slot nurnber rentered in Step 3
Select T1 or
PRI.
lf you selected PRI, you have finished this
procedure. Go to "Frame Format."
xx= slot number entered in Step 3
>
If the trunk type you want is not
displayed, go to the second screen
p
OO
of the Port Type Slot menu.
Press More to view second screen.
Press the button or function key next to ←
your selection.
Press the button or function key next to
your selection.
If you selected All Ground, All Loop, All
Unequipped, or A11DID, you have finished
this procedure.
If you selected Ground Start, Loop
Start, or Unequipped trunks, go to
Step 10.
If you selected TIE or ALL TIE trunks, go
to Step 11.
Additional Information
PC
[ F1 ]
[ F2 ]
[ F10 ]
[ PgUp ]
←
[ F10 ]