AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 392

Lines and Trunks
Console Procedure To program a single line/trunk:
PC Procedure
Procedure: QCC Queue Priority Level
Console Display/Instructions
1 Select the Lines and Trunks menu.
System Programming:
Make a selection
Extensions
System
Options
SysRenumber
Operator Tables
LinesTrunks AuxEquip
Exit NightSrvce
2 Go to the second screen of the Lines and Trunks menu.
Lines and Trunks:
Make a selection
LS/GS/DSl PRI
copy
TIE Lines
TT/LS Disc RemoteAccss
Pools
DID
Exit Toll Type
3 Select QCC Queue Priority.
Lines and Trunks:
Make a selection
LS-ID Delay
HoldDiscnct
PrncipalUsr
QCC Prior
QCC Oper
Exit
4-42
Programming Procedures
LinesTrunks → More → QCC Prior → Dial priority level →
Enter → Select entry mode → Dial trunk no. → Enter → Exit
→ Exit
To program a block of lines/trunks:
LinesTrunks → More → QCC Prior → Dial priority level →
Enter → Select block of lines → Toggle LED On/Off → Enter
→ Exit → Exit
To program a single line/trunk:
[ F4 ] → [ PgUp ] → [ F3 ] → Type priority level → Select entry mode
→ Type trunk no. → [ F10 ] → [ F5 ] → [ F5 ]
To program a block of lines/trunks:
[ F4 ] → [ PgUp ] → [ F3 ] → Type Priority IeveI → [ F10 ] → SeIect bl
of lines → Toggle letter G On/Off → [ F10 ] → [ F5 ] → [ F5 ]
Additional Information
>
>
Press More.
>
k
OC
PC
[ F4 ]
[ PgUp ]
[ F3 ]