AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 165

QCC Optional Features
Console Display/Instructions
6 Assign operators to the receive calls from the next Group Coverage number or
go to Step 7.
Select Next
7 Return to the System Programming menu.
Select Exit five times.
Call Type Procedure
1 Select Operator.
****
Make a selection
Priority
Operator
Exit
2 Specify the operator position.
**** Operator:
Enter QCC operator
extension number (0 =init)
Delete
Backspace
Exit Enter
Assign or remove the operator from the call type specified in Step 4 of the main
3
procedure.
Select Enter or
Delete.
Return to the System Programming menu.
4
Select Exit five times.
Additional Information
Return to Step 4. The next Group
Coverage number will display on Line 1.
**** = option name selected in Step 4
**** = option name selected in Step 4
If no DSS is attached:
SP: '(Entering an Extension"
If DSS is attached:
Toggle the red LED on or .
off as required.
On = operator receives call type.
Flashing = operator does not receive call type.
Off = extension is not an operator position.
You may continue to assign or remove
QCC operators from the call type by
repeating Steps 2 and 3.
Common Administrative Procedures
PC
[ F9 ]
[ F5 ] [ F5 ] [ F5 ] [ F5 ] [ F5 ]
[ F2 ]
←
[ F10 ]
[ F8 ]
[ F5 ] [ F5 ] [ F5 ] [ F5 ] [ F5 ]
3-43