AT&T DL72210 Quick Start Manual
Dect 6.0 cordless telephone/answering system with bluetooth wireless technology
Hide thumbs
Also See for DL72210:
- Quick start manual (37 pages) ,
- Complete user's manual (159 pages) ,
- Quick start manual (37 pages)
Related Manuals for AT&T DL72210
Summary of Contents for AT&T DL72210
- Page 1 Quick start guide DL72210/DL72310/DL72340/ DL72350/DL72510/DL72570/ DL72580 DECT 6.0 cordless telephone/ answering system with BLUETOOTH® wireless technology...
-
Page 2: Parts Checklist
1 (800) 222-3111 1 (866) 288-4268 or call . In Canada, dial Please refer to the online DL72210/DL72310/DL72340/DL72350/ DL72510/DL72570/DL72580 DECT 6.0 cordless telephone/answering system with BLUETOOTH® wireless technology Complete user’s manual for a full set of installation and operation instructions at https://telephones.att.com/manuals... -
Page 3: Important Safety Information
Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information Read and understand all instructions in the user’s manual. - Page 4 Important safety information CAUTIONS: Use only the power adapter provided with this product. To obtain a replacement, https://telephones.att.com visit our website at or call 1 (800) 222-3111 1 (866) 288-4268 . In Canada, dial Use only the supplied rechargeable battery or replacement battery (model BT162342/ BT262342).
- Page 5 Important safety information The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel- metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center.
- Page 6 Install Telephone base Notes: Plug one end of the telephone line cord into a telephone jack or a DSL filter. If you have DSL high-speed Internet service, a DSL filter (not included) is required. Charger Caution: Use only the power adapter(s) provided with this product.
- Page 7 Install Battery Install the battery, as shown below. Charge your handset(s) before initial use. The battery is fully charged after 11 The CHARGE light on the top of the handset is on hours of continuous charging. during charging. Caution: Use only the supplied rechargeable battery or replacement battery (model BT162342/BT262342).
-
Page 8: Handset Overview
Handset overview Handset CHARGE light Ì On when the handset is charging in the telephone base or charger. VOL p DIR Press to show directory entries when the handset is Ì not in use. Press to scroll up while in menus. Ì... - Page 9 Handset overview Press to make or answer a home call. Ì HOME/ During a call, press to answer an incoming home call Ì FLASH when you receive a call waiting alert. While reviewing a caller ID log entry, press repeatedly Ì...
- Page 10 Handset / Telephone base overview QUIET# Press repeatedly to display other dialing options when Ì reviewing a caller ID log entry. Press and hold to enter the QUIET mode setting Ì screen, or to deactivate QUIET mode. VOICE While connected to one or two cell phones, press to Ì...
-
Page 11: Telephone Base Overview
Telephone base overview When the telephone is idle, press to decrease the Ì telephone base ringer volume. Ì During call screening or message playback, press to decrease the listening volume. When the telephone is idle, press to increase the Ì telephone base ringer volume. -
Page 12: Date And Time
Initial basic settings After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. To skip setting the date and time, OFF/CANCEL on the handset. press Voice guide to set Smart call blocker and answering system After the date and time setting is done or skipped, the handset will prompt if you want to set Smart call blocker. -
Page 13: Record Your Own Announcement
Add a Bluetooth cell phone/headset ® Note: Your DL72210/DL72310/DL72340/DL72350/DL72510/DL72570/DL72580 is compatible with Bluetooth version 2.0 or above devices. To use a Bluetooth enabled cellular phone or headset with your telephone, you must first pair and connect your Bluetooth cellular phone or headset with the telephone base. -
Page 14: Number Of Rings
Initial basic settings Using a cordless handset: 1. MENU -> -> Answering sys -> SELECT. SELECT to select Announcement. 3. Press 7 to record. 4. Speak towards the handset to record your announcement and press to end recording and save it. Number of rings You can set the answering system to answer an incoming call after 2, 3, 4, 5, or 6 rings. -
Page 15: Lcd Language
Initial basic settings LCD language Using a cordless handset: 1. MENU -> -> Settings -> SELECT. SELECT again to select LCD language. to choose English, Français or Español -> SELECT. Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. - Page 16 Download a cell phone directory To download a cell phone directory using a cordless handset: Before downloading a directory, make sure the cell phone is paired, active, and connected to your DL72210/DL72310/DL72340/DL72350/DL72510/DL72570/ DL72580. MENU ->...
-
Page 17: Connect To Cell
Connect to Cell™ application (consists of Caller ID manager and Alerts manager) using the Google Play® Store app to extend the flexibility of your DL72210/DL72310/ DL72340/DL72350/DL72510/DL72570/DL72580. Scan the QR code on the right to download the application. - Page 18 ® Bluetooth To activate remote voice control: 1. Press VOICE. -OR- If you have two connected cell phones -> to select a device. 2. When the handset plays the confirmation tone, speak toward the handset, and then wait for feedback. Make reply to the voice app’s feedback, if necessary. CANCEL 3.
-
Page 19: Smart Call Blocker
Smart call blocker * If you have subscribed to caller ID service, then you can use the Smart call blocker feature to screen incoming calls. Note: The screening feature of Smart call blocker is applicable to incoming home calls only. All incoming cell calls will get through and ring. - Page 20 Smart call blocker Call categories Call control and options Unknown calls Calls without numbers You can select one of the following Ì (for home calls five profile options for handling all − Numbers that are only) unknown home calls. “out of area“ or set to “Private“.
- Page 21 Smart call blocker Set up allow list, block list and star name list Add numbers from caller ID log Adding CID log 1. Press CID on the handset -> entry to block list SELECT 2. Press when the desired entry appears. ->...
- Page 22 Smart call blocker Set profile There are five profile setting options, which allows you to quickly set up Smart call blocker. Set profile Steps Screen unknown CALL BLOCK -> Set profile -> SELECT. -> -> Screen unknown -> SELECT. Screen all unknown home calls Screen robot CALL BLOCK...
- Page 23 Smart call blocker You can add a screened number to the block list or to the allow list. Press 2 to answer the home call, and add the Add current number to current number to the allow list. the allow list Add current number to Press 3 to block the home call, and add the current number to the block list.
-
Page 24: Answering System
Answering system About answering system and voicemail Your telephone has separate indicators for two different types of voice messages: those left on the built-in answering system and those left at your telephone service provider’s voicemail. To listen to messages recorded on the built-in answering system, refer to the Message playback section;... -
Page 25: Turn Answering System On Or Off
Answering system Turn answering system on or off The answering system must be turned on to answer and record messages. Using a cordless handset: MENU -> -> Answering sys -> SELECT. -> Answer on/off -> SELECT. to choose On or Off-> SELECT. When the answering system is on, the handset shows ANS ON. -
Page 26: Message Playback
Answering system Message playback Using the telephone base: /PLAY/STOP when the telephone base is in idle mode. Press Ì Using a cordless handset: Press MENU then SELECT when the handset is in idle mode. Ì Options during playback Feature On the telephone base On a handset Adjust playback to Press VOL... -
Page 27: For C-Ul Compliance
For C-UL compliance In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, the French version of Important safety information is included. Mesures de sécurité importantes Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant apparaître dans ce guide d’utilisation. - Page 28 For C-UL compliance Si le produit ne fonctionne pas correctement, consultez la section Dépannage (Troubleshooting) du guide d’utilisation. Si vous ne pouvez pas régler le problème, ou si le produit est endommagé, consultez la section Garantie limitée (Limited warranty) des pages 31-33. N’ouvrez pas ce produit, sauf tel qu’indiqué...
- Page 29 For C-UL compliance Spécifiquement en rapport avec les téléphones sans fil Confidentialité : Les mêmes caractéristiques qui rendent les téléphones sans fil si pratiques créent également des restrictions. Les appels téléphoniques sont transmis entre le socle du téléphone et le combiné par le biais d’ondes radio, et il se peut que vos conversations téléphoniques soient interceptées par d’autres équipements de réception d’ondes radio au sein de la portée du téléphone sans fil.
- Page 30 For C-UL compliance Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés dans l’organisme Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) : L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme.
- Page 31 FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX.
- Page 32 Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
-
Page 33: Limited Warranty
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. - Page 34 3. How long is the limited warranty period? The limited warranty period for SynJ® and Syn248® products is TWO (2) YEARS from the date of purchase, while all other products limited warranty period is ONE (1) YEAR from the date of purchase. If we replace a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to replacement Products for a period of either (a) 90 days from the date the replacement Product is shipped to you or (b) the time remaining on the...
- Page 35 2. Include “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address and telephone number. 7. Other limitations This warranty is the complete and exclusive agreement between you and Advanced American Telephones.
-
Page 36: Technical Specifications
Technical specifications RF frequency band 1921.536MHz — 1928.448MHz Channels Telephone base voltage 96 — 129 Vrms (AC voltage, 60Hz) Telephone base voltage 6VDC @400mA (DC adapter output) Handset voltage 2.4 VDC, AAA x 2, Ni-MH Charger voltage 6VDC @400mA (AC adapter output) Operating times* Talk time (handset): up to 10 hours Standby: up to 5 days...