AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 208

Optional Telephone Features
Console Display/Instructions
2 Select Dial-Out Code.
Extensions
Make a selection
RestrctCopy
LinesTrunks
Line Copy Account
BIS/HFAI
Dial Outed
Restriction Call Pickup
Exit VoiceSignl
3 Specify the extension.
Assign Pool DialOut Cd:
Enter extension
Backspace
Enter
Exit
4
Save your entry.
Select Enter
5 Enter the pool dial-out code.
Extension xxxx:
Enter pool dialout code
Delete
Next
Backspace
Enter
Exit
6 Allow or restrict the extension from using the pool dial-out code.
Select Enter or
Delete.
7 Continue to program pool diai-out codes for another extension or go to Step
Select Next
8
Return to the System Programming menu.
Exit
Select two times.
3-86
Common Administrative Procedures
Additional Information
>
lf no DSS is attached:
SP:
"Enteringan Extension"
lf DSS is attached:
Toggle the red LED on or
off as required. Go to Step 5.
On = pool dial-code is assigned.
Off = pool dial-code is not assigned.
If you get the Station Busy message, wait
for an idle condition or exit system
programming and try again later.
= extension entered in Step 3
xxxx
Dial or type [ nnn ].
You may continue to allow or restrict
additional pool dial-out codes from this
extension by repeating Steps 5 and 6.
Return to Step 5 to continue programming. The
next extension will be displayed on Line 1.
PC
[ F3 ]
←
[ F10 ]
←
[ F10 ]
[ F8 ]
8.
[ F9 ]
[ F5 ] [ F5 ]