AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 667

Program Extension
4 Select Start.
Extension Program
Press HOME to Exit
Sys Program
5 Select the line button to which you want to assign the feature.
Button:
Select
Extension Program
Sys Program
6 Program the feature(s).
Line xxx - *
Press HOME to Exit
Sys Program ListFeature
7 Repeat Steps 5 and 6 for each line button you want to program for the
extension, or press Home to return to the Centrailzed Programming menu.
Programming Codes
Table 5-1 provides a quick reference to the programming codes for the system
features.
xxxx xxxx = extension entered in Step 2
Start
xxxx = extension entered in Step 2
xxxx
Page 1
Press the line button or function key that
Page 2
corresponds to your selection.
If you are programming a telephone with
more than 20 line buttons, use Page 2 to
select Iine button 21 and above. See
Appendix E for button diagrams of all
telephones.
xxx = line selected in Step 5
* = current feature programmed
Page 1
Page 2
Use Table 5-1 to dial or type the
programming code: [ nnn ].
OR
Select ListFeature and see
"Using the List Feature Menu."
When the line button is programmed, the
system automatically returns to the screen
in Step 5.
Centralized Telephone Programming
[ F10 ]
←
[ F7 ]
←
[ F10 ]
5–5