AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 490

PRI Facilities
Summary: Dial Plan Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
4-140
Programming Procedures
System manager
Hybrid/PBX
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Service: empty; Patterns: blank; Total Digits: 0;
Delete Digits: 0; Add Digits: 0
Service: Toll, Local, Miscellaneous
Entries: 0-15
Digits per Pattern: 0-8
Total Digits: 1-14
Delete Digits: 0-14, 0=wildcard
Add Digits: 0-4 (valid digits: 0-9)
No
No
To specify Service:
LinesTrunks → PRI → DialPlanRtg → Service → Dial entry
no. → Enter → Select service → Exit → Exit → Exit
To specify Patterns:
LinesTrunks PRI → DialPlanRtg → Patterns → Dial entry
no. → Enter → ∆ροπ → Dial pattern → Enter → Exit → Exit
→ Exit
To specify Total Digits:
LinesTrunks → PRI → DialPlanRtg → Total Digits → Dial
entry no. → Enter → Drop → Dial digits → Enter → Exit →
Exit → Exit
To specify Delete Digits:
LinesTrunks → PRI → DialPlanRtg → Delete Digits → Dial
entry no. → Enter → Drop → Dial delete digits → Enter →
Exit → Exit → Exit
To specify Add Digits:
LinesTrunks → PRI → DialPlanRtg → Add Digits → Dial
entry no. → Enter → Drop → Dial add digits → Enter → Exit
→ Exit → Exit